Disassembly

AIR CONDITIONING: COMPRESSOR AND MAGNETIC CLUTCH: DISASSEMBLY

DISASSEMBLY

1. REMOVE MAGNET CLUTCH ASSEMBLY





(a) Clamp the cooler compressor in a vise.
(b) Using SST, hold the magnet clutch hub.
SST: 09960-10010
09962-01000
09963-00500
(c) Remove the bolt, magnet clutch hub and magnet clutch washer.
HINT: There is no set number of magnet clutch washers since they are used for adjusting.





(d) Using a snap ring expander, remove the snap ring and the magnet clutch rotor.
NOTE: Do not damage the seal cover of the bearing when removing the snap ring.

(e) Disconnect the connector.
(f) Using a snap ring expander, remove the snap ring and magnet clutch stator.





2. REMOVE COOLER BRACKET
(a) Remove the screw and the cooler bracket.