Installation

1GR-FE EMISSION CONTROL: AIR FUEL RATIO SENSOR: INSTALLATION

INSTALLATION

1. INSTALL AIR FUEL RATIO SENSOR
(a) Using SST, install the 2 air fuel ratio sensors onto the exhaust manifold.
SST: 09224-00010
Torque: 44 Nm (449 kgf-cm, 33 ft-lbf)





(b) Connect the 2 air fuel ratio sensor connectors.





(c) Install the exhaust manifold stay with the 3 bolts. (for LH Bank)
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)