Installation

1GR-FE ENGINE CONTROL SYSTEM: ECM: INSTALLATION

INSTALLATION

1. INSTALL NO. 1 ECM BRACKET





(a) Install the No. 1 ECM bracket with the 2 screws.
Torque: 3.0 Nm (32 kgf-cm, 28 in-lbf)
2. INSTALL NO. 2 ECM BRACKET





(a) Install the No. 2 ECM bracket with the 2 screws.
Torque: 3.0 Nm (32 kgf-cm, 28 in-lbf)
3. INSTALL ECM





(a) Install the ECM with the 3 nuts.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Connect the 5 connectors.





4. INSTALL FOUR WHEEL DRIVE CONTROL ECU (for Automatic Transmission 4WD)
(a) Install the four wheel drive control ECU with the bolt.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Connect the connector.
5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)