Installation

PARK ASSIST / MONITORING: BACK SONAR SWITCH ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL BACK SONAR SWITCH BULB CAP





(a) Install the back sonar switch bulb cap.
2. INSTALL BACK SONAR SWITCH BULB





(a) Install the back sonar switch bulb.
3. INSTALL BACK SONAR SWITCH ASSEMBLY





(a) Engage the 2 claws and install the back sonar switch.
4. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY Installation
5. INSTALL FRONT CONSOLE BOX Installation
6. INSTALL FRONT CONSOLE BOX BOTTOM MAT Installation
7. INSTALL FRONT CONSOLE BOX UPPER PANEL SUB-ASSEMBLY Installation
8. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY Installation
9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD) Installation
10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) Installation
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)