Camshaft Bearing Cap

INSTALL CAMSHAFT





Using several steps, uniformly install and tighten the 8 bearing cap bolts in the sequence shown in the illustration.
10 mm (0.39 in.) head - Torque 9.0 Nm (92 kgf-cm, 80 in-lbf)
12 mm (0.47 in.) head - Torque 24 Nm (245 kgf-cm, 18 ft-lbf)

INSTALL NO. 2 CAMSHAFT





Using several steps, uniformly install and tighten the 8 bearing cap bolts in the sequence shown in the illustration.
10 mm (0.39 in.) head - Torque 9.0 Nm (92 kgf-cm, 80 in-lbf)
12 mm (0.47 in.) head - Torque 24 Nm (245 kgf-cm, 18 ft-lbf)


NO. 3 CAMSHAFT SUB-ASSEMBLY





Using several steps, uniformly install and tighten the 8 bearing cap bolts in the sequence shown in the illustration.
10 mm (0.39 in.) head - Torque 9.0 Nm (92 kgf-cm, 80 in-lbf)
12 mm (0.47 in.) head - Torque 24 Nm (245 kgf-cm, 18 ft-lbf)

NO. 4 CAMSHAFT SUB-ASSEMBLY





Using several steps, uniformly install and tighten the 8 bearing cap bolts in the sequence shown in the illustration.
10 mm (0.39 in.) head - Torque 9.0 Nm (92 kgf-cm, 80 in-lbf)
12 mm (0.47 in.) head - Torque 24 Nm (245 kgf-cm, 18 ft-lbf)