Rod Bearing Cap
PISTON SUB-ASSEMBLY WITH CONNECTING ROD
Tighten the bolts alternately to the specified torque.
Torque 25 Nm (250 kgf-cm, 18 ft-lbf)
Mark the front side of the each connecting cap bolt with paint.
Retighten the cap bolts 90° as shown
Tighten the bolts alternately to the specified torque.
Torque 25 Nm (250 kgf-cm, 18 ft-lbf)
Mark the front side of the each connecting cap bolt with paint.
Retighten the cap bolts 90° as shown