Removal

1AR-FE STARTING: STARTER: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE COOL AIR INTAKE DUCT SEAL Removal
3. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal
4. REMOVE BATTERY Removal
5. REMOVE NO. 2 INLET AIR CLEANER Removal
6. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal
7. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY Removal
8. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal
9. REMOVE AIR CLEANER BRACKET Removal
10. REMOVE NO. 1 INLET AIR CLEANER Removal
11. REMOVE STARTER ASSEMBLY

(a) Disconnect the starter connector.
(b) Open the terminal cap, remove the nut and disconnect the starter wire.