Removal

3UR-FE ENGINE CONTROL: POWER STEERING OIL PRESSURE SWITCH: REMOVAL

REMOVAL

1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH Removal
2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH Removal
3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY Removal
4. REMOVE AIR CLEANER HOSE ASSEMBLY Removal
5. REMOVE AIR CLEANER ASSEMBLY Removal
6. REMOVE V-BANK COVER SUB-ASSEMBLY Removal
7. REMOVE FAN AND GENERATOR V BELT Removal
8. DRAIN POWER STEERING FLUID
9. REMOVE FRONT WHEEL
10. REMOVE FRONT FENDER APRON SEAL FRONT RH Removal
11. REMOVE POWER STEERING OIL PRESSURE SWITCH





(a) Disconnect the switch connector.
(b) Using a 24 mm deep socket wrench, remove the oil pressure switch.
(c) Remove the O-ring.