System Specifications

TIMING CHAIN COVER SUB-ASSEMBLY





Temporarily install the timing chain cover with the 28 bolts and nut.

Standard Bolt:





Make sure that there is no oil on the bolt threads.





Tighten the 3 bolts in several steps in the sequence shown in the illustration.
Torque 47 Nm (479 kgf-cm, 35 ft-lbf)





Temporarily install the fluid coupling bracket with the 4 bolts.

Standard Bolt









Temporarily install the belt tensioner with the standard bolt and 6 mm hexagon wrench bolt.





Tighten the 8 bolts labeled 4 to 11 in several steps in the sequence shown in the illustration.
Torque 47 Nm (479 kgf-cm, 35 ft-lbf)

Tighten the 23 bolts and nut labeled 12 to 35 in several steps in the sequence shown in the illustration.





Torque 23 Nm (235 kgf-cm, 17 ft-lbf)

TIMING CHAIN TENSIONER

NO. 1 CHAIN TENSIONER ASSEMBLY RH

Install the chain tensioner with the 2 bolts.
Torque 10 Nm (102 kgf-cm, 7 ft-lbf)

NO. 2 CHAIN TENSIONER ASSEMBLY

Install the chain tensioner with the 2 bolts.
Torque 10 Nm (102 kgf-cm, 7 ft-lbf)

NO. 3 CHAIN TENSIONER ASSEMBLY

Install the chain tensioner with the 2 bolts.
Torque 10 Nm (102 kgf-cm, 7 ft-lbf)

NO. 1 CHAIN TENSIONER ASSEMBLY LH

Install a new gasket and the chain tensioner with the 2 bolts.
Torque 10 Nm (102 kgf-cm, 7 ft-lbf)

CRANKSHAFT PULLEY

Torque 300 Nm (3059 kgf-cm, 221 ft-lbf)