Removal

OTHER SYSTEM: REAR POWER OUTLET SOCKET: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE REAR DOOR SCUFF PLATE LH Removal
3. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
4. REMOVE PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY
5. REMOVE TONNEAU COVER ASSEMBLY
6. REMOVE REAR FLOOR NO. 1 BOARD
7. REMOVE DECK BOARD ASSEMBLY
8. REMOVE REAR FLOOR NO. 3 BOARD
9. REMOVE REAR FLOOR NO. 2 BOARD
10. REMOVE REAR FLOOR NO. 1 MAT SUPPORT SIDE PLATE Removal
11. REMOVE BACK DOOR WEATHERSTRIP
12. REMOVE REAR FLOOR FINISH PLATE Removal
13. REMOVE RECLINING REMOTE CONTROL LEVER BEZEL LH
14. REMOVE TETHER ANCHOR BRACKET SUB-ASSEMBLY
15. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (w/ Rear No. 2 Seat) Removal
16. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (w/o Rear No. 2 Seat) Removal





17. REMOVE REAR POWER OUTLET SOCKET ASSEMBLY
(a) Detach the 2 claws fittings and remove the socket.