Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2009 >> Sequoia 2WD V8-4.7L (2UZ-FE) >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> System Specifications >> Cylinder Head Torque and Sequence
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cylinder Head Torque and Sequence

CYLINDER HEAD LH





Install and uniformly tighten the 10 cylinder head bolts and plate washers in the sequence shown in the illustration.

Torque 40 Nm (408 kgf-cm, 30 ft-lbf)





Mark the cylinder head bolt head with paint as shown in the illustration.
Further tighten the cylinder head bolts 90° and then an additional 90° as shown in the illustration.
Check that the painted marks are now facing rearward.

CYLINDER HEAD SUB-ASSEMBLY (for Bank 2)





Install and uniformly tighten the 10 cylinder head bolts and plate washers in the sequence shown in the illustration.

Torque 40 Nm (408 kgf-cm, 30 ft-lbf)





Mark the cylinder head bolt head with paint as shown in the illustration.
Further tighten the cylinder head bolts 90° and then an additional 90° as shown in the illustration.
Check that the painted marks are now facing rearward.
pro multis · About Operation CHARM