Crankshaft, Engine
CRANKSHAFT
There are 6 standard bearing sizes. For the No. 1 and No. 5 position bearings, use bearings marked 4, 5, 6, 7, 8 and 9. For other bearings, use bearings marked 3, 4, 5, 6, 7 and 8.
Example:
Cylinder block "07" + Crankshaft "06" = Total number 13 (Use upper bearing "6" and lower bearing "7")
A = Cylinder block number mark
B = Crankshaft number mark
Standard Bearing Center Wall Thickness:
No. 1 and No. 5 Journals
Other Journals:
