Installation

1GR-FE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR: INSTALLATION

INSTALLATION

1. INSTALL CRANKSHAFT POSITION SENSOR
(a) Apply a light coat of engine oil to the O-ring of the sensor.





(b) Install the sensor with the bolt.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
(c) Connect the sensor connector.
2. CONNECT COOLER COMPRESSOR ASSEMBLY Installation
3. INSTALL GENERATOR ASSEMBLY Installation
4. INSTALL FAN AND GENERATOR V BELT Installation
5. INSTALL NO. 1 ENGINE UNDER COVER Installation
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: Some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.