Collision Avoidance System Switch: Testing and Inspection

PARK ASSIST / MONITORING: CLEARANCE SONAR MAIN SWITCH: INSPECTION

INSPECTION

1. INSPECT DRIVE MONITOR SWITCH (CLEARANCE SONAR MAIN SWITCH)





(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:





If the result is not as specified, replace the monitor switch.
(b) Inspect the switch illumination.
(1) Connect the battery's positive (+) lead to terminal 1 (ILL+) and the negative (-) lead to terminal 6 (ILL-).
(2) Check that the light comes on.
OK:
LED comes on.
If the result is not as specified, replace the monitor switch.