Installation

METER: COMBINATION METER: INSTALLATION

INSTALLATION

1. INSTALL COMBINATION METER ASSEMBLY





(a) Connect the connector and clamp.





(b) Install the combination meter with the 4 screws.
2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
(a) Install the wire harness to the finish panel slots.
(b) Connect the connectors and clamps.









(c) Attach the 12 clips to install the finish panel.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: Some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.