Installation

LIGHTING: TURN SIGNAL FLASHER ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL TURN SIGNAL FLASHER ASSEMBLY





(a) Install the flasher with the nut.
(b) Connect the connector.
2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD INSERT Installation
3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH Installation
4. INSTALL INSTRUMENT SIDE PANEL LH Installation
5. INSTALL COWL SIDE TRIM BOARD LH Installation
6. INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab) Installation
7. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab) Installation