Installation

2UZ-FE ENGINE CONTROL SYSTEM: ACCELERATOR PEDAL: INSTALLATION

INSTALLATION

1. INSTALL ACCELERATOR PEDAL ROD ASSEMBLY
NOTICE:
- Avoid physical shocks to the accelerator pedal assembly.
- Do not disassemble the accelerator pedal assembly.





(a) Install the accelerator pedal rod with the 2 nuts.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
(b) Connect the accelerator pedal position sensor connector.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: Some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.