Removal

2UZ-FE FUEL: FUEL PUMP: REMOVAL

REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
- Some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
- After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE FUEL TANK CAP
4. REMOVE NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY (for Rough Road Area Specification Vehicles) Removal
5. DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY Removal
6. DISCONNECT FUEL TANK RETURN TUBE Removal
7. DISCONNECT VENT LINE HOSE Removal
8. DISCONNECT WIRE HARNESS Removal
9. DISCONNECT FUEL TANK TO FILLER PIPE HOSE Removal
10. DISCONNECT NO. 1 CANISTER OUTLET HOSE Removal
11. REMOVE FUEL TANK ASSEMBLY Removal
12. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY Removal