Installation

SUPPLEMENTAL RESTRAINT SYSTEM: CURTAIN SHIELD AIRBAG ASSEMBLY (for CrewMax): INSTALLATION

INSTALLATION

1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY
(a) Install the curtain shield airbag with the 10 bolts.





Torque: 11 Nm (110 kgf-cm, 8 ft-lbf)
NOTE: Do not twist the curtain shield airbag when installing it.

(b) Connect the connector.
NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.

2. INSTALL ROOF HEADLINING ASSEMBLY
(a) Refer to the procedures from "INSTALL ROOF HEADLINING ASSEMBLY" (for CrewMax) Installation
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: Some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.