Removal

SUPPLEMENTAL RESTRAINT SYSTEM: CURTAIN SHIELD AIRBAG CUTOFF SWITCH: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTICE:
- After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.
- Some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE FRONT DOOR SCUFF PLATE LH (for Regular Cab) Removal
3. REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab) Removal
4. REMOVE COWL SIDE TRIM BOARD LH Removal
5. REMOVE INSTRUMENT SIDE PANEL LH Removal
6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH Removal
7. REMOVE CURTAIN SHIELD AIRBAG CUTOFF SWITCH





(a) Disconnect the connector.
(b) Detach the 2 claws and remove the switch.