Installation

BRAKE CONTROL: STEERING ANGLE SENSOR: INSTALLATION

INSTALLATION

1. INSTALL STEERING ANGLE SENSOR Installation
2. INSTALL SPIRAL CABLE SUB-ASSEMBLY Installation
3. INSTALL UPPER STEERING COLUMN COVER Installation
4. INSTALL LOWER STEERING COLUMN COVER Installation
5. ADJUST SPIRAL CABLE Installation
6. INSTALL STEERING WHEEL ASSEMBLY Installation
7. INSTALL STEERING PAD Installation
8. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation
9. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation
10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: Some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

11. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.