Installation

CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: INSTALLATION

INSTALLATION

1. INSTALL CRUISE CONTROL MAIN SWITCH





(a) Install the switch, as shown in the illustration.





(b) Install the 2 screws.
(c) Connect the connector.
2. INSTALL STEERING PAD (w/ Steering Pad Switch) Installation
3. INSTALL STEERING PAD (w/o Steering Pad Switch) Installation
4. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation
5. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: Some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

7. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.