Reassembly

AIR CONDITIONING: EVAPORATOR TEMPERATURE SENSOR: REASSEMBLY

REASSEMBLY

1. INSTALL EVAPORATOR TEMPERATURE SENSOR
NOTE: If reusing the evaporator, do not insert the sensor into a location where the sensor was previously inserted.

(a) Install the sensor to a location that is 1 fin to the right or left of its previous location.

2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

(a) Install the evaporator to the blower case (front side).

(b) Install the blower case (back side).
(c) Install the 6 screws and attach the 4 claws.

(d) Install the packing.
3. INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY

(a) Install the heater radiator unit.
(b) Attach the 3 claws to install the heater clamp.

4. INSTALL COOLING UNIT DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)
(a) Install the damper servo with the 3 screws, as shown in the illustration.
(b) Connect the connector.

5. INSTALL BLOWER DAMPER SERVO SUB-ASSEMBLY
(a) Install the damper servo with the 3 screws.
(b) Connect the connector.

6. INSTALL BLOWER CASE SUB-ASSEMBLY
(a) Attach the 3 claws to install the case.
(b) Install the 3 screws.

7. INSTALL DAMPER SERVO SUB-ASSEMBLY
(a) Install the damper servo with the 3 screws.
(b) Connect the connector.
8. INSTALL DAMPER SERVO SUB-ASSEMBLY

(a) Install the servo motor.
(1) Set the plate so that the cutout part engages with the tooth of the gear, and attach the claw to install the main plate.
(2) Install the 2 screws.

(b) Install the servo motor.
(1) Insert the pin into the plate groove.
(2) Attach the claw to install the main plate.
(3) Install the 2 screws.
(c) Set the damper servo so that the cutout part engages with the tooth of the gear, and attach the claw to install the damper servo.

(d) Install the 4 screws and connect the 2 connectors.

9. INSTALL AIR DUCT
(a) Install the duct with the 2 screws.

10. INSTALL BLOWER WITH FAN MOTOR SUB-ASSEMBLY
(a) Install the motor with the 3 screws.

11. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY
(a) Install the amplifier with the 2 screws.

12. INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY
(a) install the duct with the screw.

13. INSTALL CLEAN AIR FILTER
(a) Install the filter as shown in the illustration.

14. INSTALL AIR FILTER COVER PLATE
(a) Attach the 2 clips to install the plate.

15. INSTALL NO. 3 AIR DUCT SUB-ASSEMBLY
(a) Attach the 4 claws to install the duct.

16. INSTALL LOWER DEFROSTER NOZZLE ASSEMBLY
(a) Attach the 4 claws to install the nozzle.
17. INSTALL AIR CONDITIONING UNIT
(a) Install the air conditioning unit Installation.