Oil Pan, Engine

NO. 1 OIL PAN SUB-ASSEMBLY





Temporarily install the No. 1 oil pan with the 19 bolts, stud bolt and 2 nuts.
Bolt length:





Make sure the rear ends of the No. 1 oil pan and cylinder block are aligned. If not, the oil pan may become damaged.

Uniformly tighten the bolts and nuts in several passes.
for bolt A, D, E - Torque: 7.5 Nm (76 kgf-cm, 66 in-lbf)
for bolt B, C, nut - Torque: 28 Nm (286 kgf-cm, 21 ft-lbf)


NO. 2 OIL PAN SUB-ASSEMBLY





Install the No. 2 oil pan with the 8 bolts and 2 nuts. Uniformly tighten the bolts and nuts in several passes.
Torque 7.5 Nm (76 kgf-cm, 66 in-lbf)