Exhaust Manifold Torque and Sequence

EXHAUST MANIFOLD SUB-ASSEMBLY LH





Using a 12 mm deep socket wrench, install the exhaust manifold sub-assembly LH and 6 nuts in the order shown in the illustration.

Torque 21 Nm (214 kgf-cm, 15ft-lbf)

EXHAUST MANIFOLD SUB-ASSEMBLY RH





Using a 12 mm deep socket wrench, install the exhaust manifold sub-assembly RH by tightening the 6 nuts in the order shown in the illustration.

Torque 21 Nm (214 kgf-cm, 15ft-lbf)

Connect the air fuel ratio sensor connector (for Bank 1 Sensor 1).