Air Conditioning System (For Manual Air Conditioning System)
HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Manual Air Conditioning System): B1443: Air Outlet Damper Control Servo Motor Circuit
B1443 - Air Outlet Damper Control Servo Motor Circuit
DESCRIPTION
The damper servo sub-assembly (mode damper servo) sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on the signals to move the air outlet damper to any position, which controls the air outlet changes.
HINT
Confirm that no mechanical problem is present because this trouble code may be stored when either a damper link or damper is mechanically locked.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1. READ VALUE USING TECHSTREAM (MODE DAMPER SERVO)
(a) Use the Data List to check if the damper servo sub-assembly (mode damper servo) is functioning properly Air Conditioning System (for Manual Air Conditioning System).
Air Conditioner
OK:
The display is as specified in the normal condition column.
Result
C -- PERFORM ACTIVE TEST USING TECHSTREAM (MODE DAMPER SERVO)
B -- REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY Removal
A -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Air Conditioning System (for Manual Air Conditioning System)
2. PERFORM ACTIVE TEST USING TECHSTREAM (MODE DAMPER SERVO)
(a) Select the Active Test, use the Techstream to generate a control command, and then check that the damper servo sub-assembly (mode damper servo) operates Air Conditioning System (for Manual Air Conditioning System).
Air Conditioner
OK:
Damper servo sub-assembly (mode damper servo) operates normally.
NG -- REPLACE DAMPER SERVO SUB-ASSEMBLY (MODE DAMPER SERVO)
OK -- REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY Removal
3. REPLACE DAMPER SERVO SUB-ASSEMBLY (MODE DAMPER SERVO)
(a) Replace the damper servo sub-assembly (mode damper servo) Disassembly.
HINT
Since the damper servo sub-assembly (mode damper servo) cannot be inspected while it is removed from the vehicle, replace the damper servo sub-assembly (mode damper servo) with a new or normally functioning one.
NEXT -- Continue to next step.
4. CHECK FOR DTC
(a) Clear the DTCs Air Conditioning System (for Manual Air Conditioning System).
(b) Check for DTCs Air Conditioning System (for Manual Air Conditioning System).
OK:
DTC B1443 is not output.
NG -- REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY
OK -- END (DAMPER SERVO SUB-ASSEMBLY [MODE DAMPER SERVO] IS FAULTY)
5. REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY
(a) Temporarily replace the air conditioning amplifier assembly with a new or normally functioning one Removal.
NEXT -- Continue to next step.
6. CHECK FOR DTC
(a) Clear the DTCs Air Conditioning System (for Manual Air Conditioning System).
(b) Check for DTCs Air Conditioning System (for Manual Air Conditioning System).
OK:
DTC B1443 is not output.
NG -- REPLACE AIR CONDITIONING HARNESS ASSEMBLY Disassembly
OK -- END (AIR CONDITIONING AMPLIFIER ASSEMBLY IS FAULTY)