Installation

2TR-FE STARTING: IGNITION SWITCH: INSTALLATION

1. INSTALL IGNITION SWITCH ASSEMBLY

(a) Attach the claw to connect the key interlock solenoid wire harness to the ignition switch.

(b) Install the ignition switch with the 2 screws.

(c) Connect the ignition switch connector and key interlock solenoid connector and attach the wire harness clamp.

2. INSTALL LOWER STEERING COLUMN COVER

(a) Attach the 2 claws to install the lower steering column cover.

(b) Install the 2 screws.

HINT
Turn the steering wheel to the right and left as necessary to install the 2 screws.