Installation

VF4BM TRANSFER / 4WD / AWD: TRANSFER ASSEMBLY: INSTALLATION

1. INSTALL TRANSFER ASSEMBLY

(a) Install the transfer assembly with the 8 bolts.

Torque : 24 Nm (245 kgf-cm, 18 ft-lbf)

NOTICE:
Take care not to damage the adaptor rear oil seal with the transfer input gear spline.

2. INSTALL AUTOMATIC TRANSMISSION WITH TRANSFER

(a) Install the automatic transmission with transfer Installation.

3. ADD TRANSFER OIL VF4BM Transfer Case

4. CHECK FOR TRANSFER OIL LEAK