Skid Control Sensor

BRAKE CONTROL: SKID CONTROL SENSOR: INSPECTION

1. INSPECT SKID CONTROL SENSOR (for BOSCH Made)

(a) Inspect the skid control sensor. If any of the following occurs, replace the skid control sensor with a new one:

* The surface of the skid control sensor is cracked, dented, or chipped off.

* The connector is scratched, cracked, or damaged.

* The skid control sensor has been dropped.

(b) Measure the resistance according to the value(s) in the table below.





Standard resistance:

LH






RH






(c) If the value is not as specified, replace the skid control sensor.

2. INSPECT SKID CONTROL SENSOR (for ADVICS Made)

(a) Inspect the skid control sensor. If any of the following occurs, replace the skid control sensor with a new one:

* The surface of the skid control sensor is cracked, dented, or chipped off.

* The connector is scratched, cracked, or damaged.

* The skid control sensor has been dropped.

(b) Measure the resistance according to the value(s) in the table below.





Standard resistance:

RH






LH






(c) If the value is not as specified, replace the skid control sensor.