How to Proceed With Troubleshooting

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ANTI-LOCK BRAKE SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HINT
* The anti-lock brake system troubleshooting procedures are based on the premise that the CAN communication system is normally functioning. Check the CAN communication system first before troubleshooting the anti-lock brake system How to Proceed With Troubleshooting
* *: Use the Techstream.
1. VEHICLE BROUGHT TO WORKSHOP

NEXT -- Continue to next step.

2. CUSTOMER PROBLEM ANALYSIS

(a) Interview the customer and confirm the problem How To Proceed With Troubleshooting.

NEXT -- Continue to next step.

3. CHECK DTC AND FREEZE FRAME DATA*

(a) Check and record DTCs and Freeze Frame Data.

(b) Clear the DTCs and Freeze Frame Data ABS (Antilock Brake System) for DTC Check/Clear, and Freeze Frame Data for Freeze Frame Data).

(c) Reconfirm the DTCs.

(1) Reconfirm the DTCs based on the recorded DTCs and Freeze Frame Data ABS (Antilock Brake System) for DTC Check/Clear, and Freeze Frame Data for Freeze Frame Data).

Result:





B -- GO TO STEP 5

C -- GO TO STEP 6
A -- Continue to next step.

4. DIAGNOSTIC TROUBLE CODE CHART

(a) Proceed to Diagnostic Trouble Code Chart ABS (Antilock Brake System).

NEXT -- GO TO STEP 7

5. SYMPTOM SIMULATION

(a) Proceed to Diagnosis System Diagnosis System.

NEXT -- Continue to next step.

6. PROBLEM SYMPTOMS TABLE

(a) Proceed to Problem Symptoms Table ABS (Antilock Brake System).

NEXT -- Continue to next step.

7. CIRCUIT INSPECTION*

NEXT -- Continue to next step.

8. IDENTIFICATION OF PROBLEM

NEXT -- Continue to next step.

9. REPAIR OR REPLACEMENT

NEXT -- Continue to next step.

10. CONFIRMATION TEST*

NEXT -- END