Removal

2ZR-FE ENGINE CONTROL: ECM: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

3. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

4. REMOVE ECM

(a) Separate the wire harness clamp.





(b) Disconnect the 2 ECM connectors.





(1) Push the locks on the 2 levers, then raise the levers, and disconnect the 2 ECM connectors.

NOTICE:
After disconnecting the connectors, make sure that dirt, water or other foreign matter does not contact the connecting parts of the connectors.

(c) Remove the 3 bolts and the ECM.

(d) Remove the 4 screws and 2 ECM brackets.