Service Data

SPECIFICATIONS: ALIGNMENT / HANDLING DIAGNOSIS: SERVICE DATA

Vehicle Height (Unloaded Vehicle):

* For vehicle height for Mexico, add 15 mm (0.591 in.).

Measuring points:

* A: No. 1 lower suspension arm bushing set bolt ground clearance

* B: Rear axle beam set bolt ground clearance

* C: Front wheel center ground clearance

* D: Rear wheel center ground clearance

Wheel Angle (Unloaded Vehicle):

* For vehicle height for Mexico, add 15 mm (0.591 in.).

Camber (Unloaded Vehicle):

* For vehicle height for Mexico, add 15 mm (0.591 in.).

Caster (Unloaded Vehicle):

* For vehicle height for Mexico, add 15 mm (0.591 in.).

Steering Axis Inclination (Unloaded Vehicle):

* For vehicle height for Mexico, add 15 mm (0.591 in.).

Toe-in:

* For vehicle height for Mexico, add 15 mm (0.591 in.).