Removal

AXLE AND DIFFERENTIAL: REAR AXLE HUB: REMOVAL

HINT
* Use the same procedure for the RH side and LH side.
* The procedure listed below is for the LH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH (for Rear Disc Brake) Removal

3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH (for Rear Disc Brake) Removal

4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Rear Disc Brake)

HINT
* for Manual Transaxle Removal
* for Automatic Transaxle Removal
5. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Rear Disc Brake)

HINT
* for Manual Transaxle Removal
* for Automatic Transaxle Removal
6. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for Rear Disc Brake) Removal

7. LOOSEN PARKING BRAKE CABLE (for Rear Disc Brake) Removal

8. REMOVE REAR WHEEL

9. DISCONNECT REAR SPEED SENSOR WIRE (for Rear Drum Brake) Removal

10. DISCONNECT REAR SPEED SENSOR WIRE (for Rear Disc Brake) Removal

11. REMOVE PARKING BRAKE LEVER PROTECTOR (for Rear Disc Brake) Removal

12. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY (for Rear Disc Brake) Removal

13. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY (for Rear Disc Brake) Replacement

14. REMOVE REAR DISC (for Rear Disc Brake) Removal

15. REMOVE REAR BRAKE DRUM (for Rear Drum Brake) Removal

16. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY (for Rear Drum Brake)

(a) Remove the 4 bolts and the rear axle hub and bearing assembly.





17. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY (for Rear Disc Brake)

(a) Remove the 4 bolts and the rear axle hub and bearing assembly.