Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2010 >> FJ Cruiser 2WD V6-4.0L (1GR-FE) >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Knock Sensor >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





1GR-FE ENGINE CONTROL SYSTEM: KNOCK SENSOR: INSTALLATION

1. INSTALL KNOCK SENSOR

(a) Install the 2 sensors with the 2 bolts as shown in the illustration.









Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

(b) Connect the 2 sensor connectors.

2. INSTALL NO. 1 WATER OUTLET PIPE

(a) Install the No. 1 water outlet pipe with the 2 nuts and bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(b) Connect the 4 wire harness clamps.

3. INSTALL CYLINDER HEAD SUB-ASSEMBLY (for Bank 1)

(a) Install the cylinder head Installation.
pro multis · About Operation CHARM