Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2010 >> FJ Cruiser 2WD V6-4.0L (1GR-FE) >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair >> Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal





1GR-FE ENGINE CONTROL SYSTEM: ECM: REMOVAL

* Perform the RESET MEMORY (AT initialization) when replacing the automatic transmission assembly, engine assembly or ECM or Programming and Relearning).

* Perform the REGISTRATION (VIN registration) when replacing the ECM Programming and Relearning.

* If the ECM has been replaced or RESET MEMORY (AT initialization) has been performed, set up the function of the ATF (Automatic Transmission Fluid) temperature warning lamp or Programming and Relearning).

1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

2. REMOVE FOUR WHEEL DRIVE CONTROL ECU (for Automatic Transmission 4WD)





(a) Disconnect the connector.

(b) Remove the bolt and four wheel drive control ECU.

3. REMOVE ECM

(a) Disconnect the 6 connectors.





(b) Remove the 3 nuts and ECM.

4. REMOVE ECM BRACKET





(a) Remove the 2 screws and ECM bracket.

5. REMOVE NO. 2 ECM BRACKET





(a) Remove the 2 screws and No. 2 ECM bracket.
pro multis · About Operation CHARM