DTC 80-41

NAVIGATION: NAVIGATION SYSTEM: 58-40,58-41,80-40,80-41: GPS Antenna Error
80-41 - GPS Antenna Power Source Error

DESCRIPTION





INSPECTION PROCEDURE

HINT
After the inspection is completed, clear the DTCs.

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (GPS ANTENNA - NAVIGATION RECEIVER ASSEMBLY)

(a) Check that the GPS antenna cord is securely connected to the navigation receiver assembly connector.

OK:

The cord is securely connected.

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

2. REPLACE GPS ANTENNA

(a) Replace the GPS antenna with a normal one and check if the same problem occurs again Removal.

(1) Clear the DTCs Reading and Clearing Diagnostic Trouble Codes.

(2) Recheck for DTCs and check if the same trouble occurs again.

OK:

The same problem does not occur.

NG -- REPLACE NAVIGATION RECEIVER ASSEMBLY Removal

OK -- END