Illumination For Panel Switch Does Not Come On With Tail Switch On

NAVIGATION: NAVIGATION SYSTEM: Illumination for Panel Switch does not Come on with Tail Switch ON
- Illumination for Panel Switch does not Come on with Tail Switch ON

INSPECTION PROCEDURE

PROCEDURE

1. CHECK VEHICLE SIGNAL (DISPLAY CHECK MODE)

(a) Enter the "Display Check" mode (Vehicle Signal Check Mode) Display Check Mode.





(b) Check that the display changes between ON and OFF according to the light control switch operation.

OK:





HINT
This display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.

NG -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE Symptom Related Diagnostic Procedures

OK -- REPLACE NAVIGATION RECEIVER ASSEMBLY Removal