Reassembly

EXTERIOR: FRONT BUMPER: REASSEMBLY

1. INSTALL FRONT BUMPER STAY LH

(a) Engage the 2 claws and install the front bumper stay LH.





(b) Install the bolt and screw.

Bolt - Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

Screw - Torque : 3.0 Nm (31 kgf-cm, 27 in-lbf)

2. INSTALL FRONT BUMPER STAY RH

HINT
Use the same procedures for the RH side and LH side.

3. INSTALL FRONT BUMPER REINFORCEMENT

(a) Install the front bumper reinforcement with the 6 bolts.





Torque : 64 Nm (653 kgf-cm, 47 ft-lbf)

4. INSTALL FRONT BUMPER ENERGY ABSORBER

(a) Engage the 2 guides and install the front bumper energy absorber.





5. INSTALL FRONT BUMPER HOLE COVER LH

(a) Engage the 2 claws and install the front bumper hole cover LH.





6. INSTALL FRONT BUMPER HOLE COVER RH

HINT
Use the same procedure for the RH side and LH side.

7. INSTALL FOG LIGHT COVER LH

(a) Engage the 6 claws and install the fog light cover LH.





8. INSTALL FOG LIGHT COVER RH

HINT
Use the same procedure for the RH side and LH side.

9. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light) Installation

10. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT
Use the same procedure for the RH side and LH side.