Removal

SUSPENSION: FRONT SUSPENSION MEMBER: REMOVAL

1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

HINT
* Refer to the procedure up to Remove Engine Assembly with Transaxle (for 2GR-FE) Removal
* Refer to the procedure up to Remove Engine Assembly with Transaxle (for 1AR-FE) Removal
2. REMOVE NO. 1 FRONT STABILIZER BRACKET LH Removal

3. REMOVE NO. 1 FRONT STABILIZER BRACKET RH

HINT
Perform the same procedure as the LH side.

4. REMOVE FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY

5. REMOVE POWER STEERING LINK ASSEMBLY Removal

6. INSTALL ENGINE HANGERS (for 2GR-FE) Removal

7. INSTALL ENGINE HANGERS (for 1AR-FE) Removal

8. REMOVE FRONT FRAME ASSEMBLY (for 2GR-FE) Removal

9. REMOVE FRONT FRAME ASSEMBLY (for 1AR-FE) Removal

10. REMOVE TRANSVERSE ENGINE MOUNTING INSULATOR (for 2GR-FE) Removal

11. REMOVE FRONT LOWER SUSPENSION ARM LH Removal

12. REMOVE FRONT LOWER SUSPENSION ARM RH

HINT
Perform the same procedure as the LH side.

13. REMOVE FRONT SUSPENSION MEMBER DYNAMIC DAMPER

(a) Remove the 2 bolts and front suspension member dynamic damper.





14. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING FRONT STOPPER

15. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR STOPPER

16. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING FRONT CUSHION

(a) Install SST as shown in the illustration.





SST : 09830-10010

09830-01010

09830-01040

09830-01050

SST : 09950-40011

09951-04020

09952-04010

09955-04011

(b) Using SST, remove the front suspension member body mounting front cushion.





NOTICE:
* Make sure that the claws of SST are securely hung onto the mounting cushion.
* Tighten SST slowly and evenly.
* Be careful as the mounting cushion may fly out.
* The mounting cushion cannot be reused.
17. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION LH

(a) Using SST, remove the front suspension member body mounting rear cushion LH.





SST : 09830-10010

09830-01010

09830-01040

09830-01050

SST : 09950-40011

09951-04020

09952-04010

09954-04010

09955-04011

NOTICE:
* Make sure that the claws of SST are securely hung onto the mounting cushion.
* Tighten SST slowly and evenly.
* Be careful as the mounting cushion may fly out.
* The mounting cushion cannot be reused.
18. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION RH

HINT
Perform the same procedure as the LH side.

SST : 09830-10010

09830-01010

09830-01040

09830-01050

SST : 09950-40011

09951-04020

09952-04010

09954-04010

09955-04011