Operation Check

DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: OPERATION CHECK

1. CHECK ELECTRICAL DOOR LOCK OPERATION

NOTICE:
The following procedure is on the premise that any functions have not been customized.

(a) Check the basic function.

(1) Check that all doors lock when the door control switch (for manual operation) is pushed to LOCK and all doors unlock when pushed to UNLOCK.

(2) Check that all doors lock when the driver side door lock key cylinder is turned to LOCK using the mechanical key.

(b) Check the electrical key lock-in prevention function (w/ Smart Key System).

NOTICE:
In order to prevent the electrical key from being actually locked-in, the following inspection should be performed with the driver side door window open.

(1) Place the electrical key in the cabin.

(2) With the driver side door open, turn the driver side door lock knob or door control switch to LOCK, and then close the driver side door. Then check that all doors unlock.

(c) Check the key lock-in prevention function (w/o Smart Key System).

NOTICE:
In order to prevent the key from being actually locked-in, the inspection should be performed with the driver side door window open.

(1) Have the key inserted into the ignition key cylinder.

(2) With the driver side door open, check that all doors unlock immediately after the door lock knob for the driver side door is turned to LOCK.

(3) With the driver side door open, check that all doors unlock immediately after the door control switch (for manual operation) is turned to LOCK.

(4) With the driver side door open, turn the driver side door lock knob to LOCK, and then close the driver side door. Then check that all doors unlock.

(d) Check the security function.

HINT
*1: w/ Smart Key System

(1) Close all doors with the driver side door window open so that the door control switch can be operated from outside the vehicle.

(2) Pull out the electrical key (*1) or mechanical key (transmitter), open the driver side door and then close and lock the door using the electrical key (*1) or mechanical key (transmitter). Under this condition, check that all doors do not unlock when the door control switch (for manual operation) is turned to UNLOCK from outside the vehicle.

(3) Pull out the electrical key (*1) or the mechanical key, and close and lock the driver side door using the mechanical key. Under this condition, check that all doors do not unlock when the door control switch (for manual operation) is turned to UNLOCK from outside the vehicle.

(4) Pull out the electrical key (*1) or mechanical key (transmitter), close the driver side door, and lock the door by wireless door lock operation. Under this condition, check that all doors do not unlock when the door control switch (for manual operation) is turned to UNLOCK from outside the vehicle.

HINT
Check that the security function is canceled under the following conditions:

* The ignition switch is turned on (IG).
* The driver side door is unlocked using the mechanical key (transmitter) or the electrical key.
* The door control switch (for manual operation) is turned to UNLOCK after the door control knob is turned to UNLOCK manually.
(e) Check the illumination function.

(1) Set the room light switch to the DOOR position.

(2) With all doors locked, check that the driver's door unlocks when the driver side door lock cylinder is turned to UNLOCK using the key. At the same time, the room light comes on.

(3) Check that the room light goes off in approximately 15 seconds if the doors have not been opened.

(f) Check the AUTO lock function.

(1) Lock all doors.

(2) Unlock the driver's door using the electrical key.

(3) Allow 30 seconds to elapse while all doors remain closed and the electrical key switch and the entry unlock switch remain untouched. Then, check that all doors will lock automatically.

(g) Check the driver door-linked automatic door unlock function.

(1) When the driver door is closed, turning the ignition switch from on (IG) to off and opening the driver door within 10 seconds will automatically unlock all the doors.

(h) Check the key-linked 2-step unlock function.

(1) Lock all doors.

(2) Check that only the driver side door unlocks when the driver side door lock cylinder is turned to UNLOCK once using the key and other doors unlock when turned to UNLOCK consecutively once again.

(i) Check the speed-sensitive automatic door lock function.

(1) When a door is unlocked and the vehicle is driven at approximately 20 km/h (12 mph) or more, check that all doors automatically lock a total of 2 times (automatic door lock).

(2) When a door lock knob is turned to UNLOCK and the vehicle is driven at approximately 20 km/h (12 mph) or more, check that all doors automatically lock a total of 2 times (repeat function).

(j) Check the automatic locking function interlocked with the shift lever.

(1) When any door is unlocked with all doors closed and the engine started, check that all doors automatically lock when the shift lever is moved into any position other than the P position.

(2) When any door is unlocked after all doors automatically lock, check that all doors attempt to automatically lock once again (retry function). The retry function is canceled when any of the following conditions is fulfilled:

* All doors are locked.

* Any door is opened.

* The shift lever is moved into the P position.

* The doors are locked or unlocked by the user.

* The ignition switch is turned off.

* The engine is stopped.