Inspection

2GR-FE ENGINE CONTROL SYSTEM: ACTIVE CONTROL ENGINE MOUNT: INSPECTION

1. INSPECT FRONT ENGINE MOUNTING INSULATOR ASSEMBLY

(a) Disconnect the vacuum hose from the front engine mounting insulator assembly.

(b) Using a vacuum pump, apply vacuum of 80 kPa (600 mmHg, 25 in.Hg) and wait for 1 minute.





(c) Check that there is no change in the needle movement of the vacuum pump gauge.

OK:

Vacuum pressure holds.

(d) Check that there is no fluid leakage caused by a break in the diaphragm.

(e) Reconnect the vacuum hose.