LIN Communication Circuit

AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System): LIN Communication Circuit
- LIN Communication Circuit

DESCRIPTION

The operation signals of a switch etc. are exchanged between terminal LIN1 of the air conditioning control assembly and terminal LIN1 of the air conditioning amplifier.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK AIR CONDITIONING SYSTEM (OPERATION)

Result:





B -- CHECK HARNESS AND CONNECTOR (REAR A/C CONTROL ASSEMBLY - AIR CONDITIONING AMPLIFIER)
A -- Continue to next step.

2. CHECK HARNESS AND CONNECTOR (A/C CONTROL ASSEMBLY - AIR CONDITIONING AMPLIFIER)

(a) Disconnect the connector from the air conditioning control assembly.





(b) Disconnect the connector from the air conditioning amplifier.

(c) Measure the resistance according to the value(s) in the table below.

Standard resistance:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE Air Conditioning System (For Automatic Air Conditioning System)

3. CHECK HARNESS AND CONNECTOR (REAR A/C CONTROL ASSEMBLY - AIR CONDITIONING AMPLIFIER)

(a) Disconnect the connector from the rear air conditioning control assembly.





(b) Disconnect the connector from the air conditioning amplifier.

(c) Measure the resistance according to the value(s) in the table below.

Standard resistance:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE Air Conditioning System (For Automatic Air Conditioning System)