Reading and Clearing Diagnostic Trouble Codes

METER: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect Techstream to the DLC3.

(b) Turn the ignition switch on (IG) and turn Techstream on.

(c) Enter the following menus: Body Electrical / Trouble Codes.

(d) Check for DTCs.

2. CLEAR DTC

(a) Connect Techstream to the DLC3.

(b) Turn the ignition switch on (IG) and turn Techstream on.

(c) Enter the following menus: Body Electrical / Trouble Codes.

(d) Erase DTCs by pressing the YES button on the tester.