Room Light Assembly (for Center)

LIGHTING: ROOM LIGHT ASSEMBLY (for Center): INSPECTION

1. INSPECT NO. 1 ROOM LIGHT ASSEMBLY (for Standard)

(a) Measure the resistance according to the value(s) in the table below.





Standard resistance:





(b) If the result is not as specified, repair or replace harness or connector.

(c) Measure the voltage according to the value(s) in the table below.

Standard voltage:





(d) If the result is not as specified, repair or replace the harness or connector.

2. INSPECT NO. 1 ROOM LIGHT ASSEMBLY (for Independent Type)

(a) Measure the resistance according to the value(s) in the table below.





Standard resistance:

LH Side






RH Side





(b) If the result is not as specified, repair or replace harness or connector.

(c) Measure the voltage according to the value(s) in the table below.

Standard voltage:

LH Side






RH Side





(d) If the result is not as specified, repair or replace the harness or connector.