Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING RESET SWITCH: INSTALLATION

1. INSTALL TIRE PRESSURE WARNING RESET SWITCH

(a) Engage the 2 claws to install the tire pressure warning reset switch to the driver side knee airbag.





2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY Installation

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Manual Air Conditioning System) Installation

4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Automatic Air Conditioning System) Installation

5. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Installation

6. INSTALL FRONT DOOR SCUFF PLATE LH Installation

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization

8. INSPECT TIRE PRESSURE WARNING SYSTEM

HINT
Test Mode Procedure

9. INSPECT SRS WARNING LIGHT

HINT
Diagnosis System