Reading and Clearing Diagnostic Trouble Codes

POWER STEERING: POWER STEERING SYSTEM: DTC CHECK / CLEAR

1. CHECK DTC

(a) Turn the ignition switch off.

(b) Connect Techstream to the DLC3.

(c) Turn the ignition switch on (IG).

(d) Turn Techstream on.

(e) Read the DTCs by following the prompts on Techstream. Enter the following menus: Chassis / EMPS / Trouble Codes.

(f) Check the details of the DTCs Power Steering System.

2. CLEAR DTC

(a) Turn the ignition switch off.

(b) Connect Techstream to the DLC3.

(c) Turn the ignition switch on (IG).

(d) Turn Techstream on.

(e) Clear the DTCs by following the prompts on Techstream. Enter the following menus: Chassis / EMPS / Trouble Codes.

(f) According to the display on Techstream, select the trouble code data display with the clear button.

(g) Turn the ignition switch off.

(h) Disconnect Techstream from the DLC3.