Removal

U151E AUTOMATIC TRANSAXLE: SPEED SENSOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization

2. REMOVE BATTERY Removal

3. REMOVE COOL AIR INTAKE DUCT SEAL Removal

4. REMOVE NO. 2 AIR CLEANER INLET Removal

5. REMOVE NO. 1 AIR CLEANER INLET Removal

6. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

7. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

8. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

9. REMOVE AIR CLEANER BRACKET Removal

10. REMOVE SPEED SENSOR (NT SENSOR)

(a) Disconnect the speed sensor connector.





(b) Remove the bolt and speed sensor.

11. REMOVE SPEED SENSOR (NC SENSOR)

(a) Disconnect the speed sensor connector.





(b) Remove the bolt and speed sensor.