Power Back Door System

ENGINE HOOD / DOOR: POWER BACK DOOR SYSTEM: DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Read the DTCs by following the directions on the tester screen.

HINT
Refer to the Techstream operator's manual for further details.

2. CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Erase the DTCs by following the directions on the tester screen.

HINT
Refer to the Techstream operator's manual for further details.