Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2010 >> Highlander 4WD V6-3.3L (3MZ-FE) Hybrid >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Variable Valve Timing >> Variable Valve Timing Actuator >> Service and Repair >> Removal

Removal





3MZ-FE ENGINE CONTROL SYSTEM: CAMSHAFT OIL CONTROL VALVE: REMOVAL

1. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal

2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal

3. REMOVE HOOD TO COWL TOP SEAL Removal

4. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Removal

5. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Removal

6. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY Removal

7. REMOVE COOL AIR INTAKE DUCT SEAL Removal

8. REMOVE NO. 2 ENGINE ROOM SIDE COVER LH Removal

9. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

10. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

11. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY RH

(a) Disconnect the camshaft timing oil control valve connector.





(b) Remove the bolt and camshaft timing oil control valve assembly.

12. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY LH

(a) Disconnect the camshaft timing oil control valve connector.





(b) Remove the bolt and camshaft timing oil control valve assembly.
pro multis · About Operation CHARM