Installation

3MZ-FE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

(a) Install a new gasket onto the engine coolant temperature sensor.

(b) Install the engine coolant temperature sensor.





Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

(c) Connect the engine coolant temperature sensor connector.

2. INSTALL AIR CLEANER BRACKET Installation

3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY Installation

4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY Installation

5. INSTALL NO. 2 ENGINE ROOM SIDE COVER LH Installation

6. INSTALL COOL AIR INTAKE DUCT SEAL Installation

7. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY Installation

8. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Installation

9. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Installation

10. INSTALL HOOD TO COWL TOP SEAL Installation

11. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH Installation

12. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH Installation